Linksys SPA921 - Cisco - IP Phone Installation And Configuration Manual page 126

Maintaining Your SPA9000 Voice System
Using the Advanced Features Menu
STEP 9
STEP 10
STEP 11
STEP 12
SPA9000 Voice System Installation and Configuration Guide for Setup Wizard
d. Press # at the end of your greeting.
e. Press 1 to save, 2 to review, or 3 to re-enter.
For the Basic AA script and the Advanced AA script, record your location and
hours message. If you are not using a location and hours message, continue to
Step 11 on page 124.
a. Press 7# to select Message 7 for your location and hours message.
b. Press 1 to record your message.
c. Listen to the instructions, and begin speaking after you hear the tone.
d. Press # at the end of your message.
e. Press 1 to save, 2 to review, or 3 to re-enter.
For the Advanced AA script only, record your non-office-hours message.
a. Press 6# to select Message 6 for your non-office-hours message.
b. Press 1 to record your message.
c. Listen to the instructions, and begin speaking after you hear the tone.
d. Press # at the end of your message.
e. Press 1 to save, 2 to review, or 3 to re-enter.
Press * to exit. Hang up the receiver. The IVR saves the changes, and the phones
reboot.
Click Next to display the Download Prompts for SPA9000 Auto Attendant page.
6
124