Linksys SPA921 - Cisco - IP Phone Installation And Configuration Manual page 85

Connecting the Equipment
Configuring Client Stations
STEP 3
SPA9000 Voice System Installation and Configuration Guide for Setup Wizard
Connect the SPA9x2 phones to PoE ports on your network switch. Connect the
WAN port on the phone to the network cable that connects to your switch. You can
connect your computer to the PC port on the phone if you only have one network
connection in your office.
If you are using a non-PoE switch, connect PA100 power adapters to the
NOTE
phones to provide power from a wall outlet.
The phones will display the following messages:
•
Initializing network
•
Checking DNS
The phone's buttons will change appearance as the installation progresses:
•
Flashing orange
•
Shining solid orange (indicating that the phone cannot properly communicate
with the SPA9000 at this time)
4
83