Linksys SPA921 - Cisco - IP Phone Installation And Configuration Manual page 104

Maintaining Your SPA9000 Voice System
Upgrading the Firmware
STEP 7
STEP 8
STEP 9
STEP 10
SPA9000 Voice System Installation and Configuration Guide for Setup Wizard
Check the box to select a device, or uncheck the box if you do not want to upgrade
the device. Refer to the following example.
•
The Wizard automatically selects a device if newer firmware is available in the
Wizard files.
•
When you are using the All devices option, you can manually check or uncheck
individual devices, or use the check box in the heading row to check or
uncheck all devices.
Click Upgrade to upgrade the selected devices.
Wait while the Wizard displays progress messages.
The Wizard sends upgrade requests, copies the firmware from the ~\Wizard\
directory to the C:\linksys\firmwaredb\ directory, and loads the new firmware to
each device. Messages also appear on the phone screen as the phone firmware is
upgraded. Do not disconnect or remove power from any device during this time.
Click OK when the Upgrade Succeeded message appears.
The Firmware Upgrade - Options page appears.
6
102