Linksys SPA921 - Cisco - IP Phone Installation And Configuration Manual page 97

Connecting the Equipment
Configuring Client Stations
STEP 4
SPA9000 Voice System Installation and Configuration Guide for Setup Wizard
USB Disk
c. When the
Windows Explorer, and then click OK. The USB drive contains the
folder.
USB Disk
If the
NOTE
navigate to the USB disk drive (usually Drive E).
d. Open spa400vm\var\lib
sounds
folder.
e. If desired, make a backup copy of the existing
You are not overwriting any user message files in this procedure.
NOTE
However, it is a good practice to make a backup copy of your files
before doing any upgrades.
f. Move the new sounds
Confirm Folder Replace
g. Safely remove the USB drive from the PC, and then insert it into the SPA400.
h. Power on the SPA400.
Place a test call to the voice mail system to confirm that the new language
prompts are used.
window appears, click Open folder to view files using
window does not appear, use Windows Explorer to
. The window displays the
folder into spa400vm\var\lib
window appears, click Yes to All.
spa400vm
lib contents, including the
sounds
folder.
on the USB drive. When the
4
95