Linksys SPA921 - Cisco - IP Phone Installation And Configuration Manual page 101

Maintaining Your SPA9000 Voice System
Using the Main Menu
SPA9000 Voice System Installation and Configuration Guide for Setup Wizard
The Main Menu provides access to the following functions:
•
Configure SPA9000: Choose this option to configure SPA9000 Voice Services.
The Wizard expects you to use up to one ITSP, up to 4 SPA400s, or up to 4
Mediatrix® devices. An ITSP must be associated with Line 1 of the SPA9000.
SPA400s and Mediatrix devices can be associated with any line. After
selecting the voice service for a line, you can click Next to configure features
such as steering digits and inbound call routing.
Configuration of ITSP and SPA400 voice services are described in
NOTE
"Configuring SPA9000 Voice Service Lines," on page
Configuration of Mediatrix services is described in
Connectivity," on page 103
•
Configure Client Stations: Choose this option to associate phones with
extensions, to configure shared line appearances, or to load language
dictionaries to phones. These procedures are described in
Internal Phone Extensions," on page
•
Advanced Features: Choose this option to configure NAT settings, client
extensions, hunt groups, Auto Attendant, localization, administrative
passwords, and the SPA932 attendant console. These procedures are
described in "Using the Advanced Features Menu," on page
69.
6
63.
"Configuring ISDN
"Configuring the
111.
99