Upgrading The Phone Firmware (If Prompted) - Linksys SPA921 - Cisco - IP Phone Installation And Configuration Manual

Connecting the Equipment
Configuring Client Stations
STEP 4
STEP 1
STEP 2
SPA9000 Voice System Installation and Configuration Guide for Setup Wizard
Click Yes to configure another phone, or click No if you want to go to the Main
Menu. Then click Next.
Congratulations! You have now completed basic configuration of your IP PBX
optional voice mail, and all phones. Click Exit to exit the Wizard.

Upgrading the Phone Firmware (If Prompted)

The Wizard verifies that each phone passes the minimum firmware version
requirement and notifies you in the event that outdated firmware is detected.
Complete this procedure if the following message appears:
required!
You must upgrade the firmware if this message appears. If you press cancel
instead of selecting a valid version of firmware for the device, an error message
appears.
Click OK to navigate to the current version of SPA9xx firmware (SPA962 in this
example) that you downloaded.
spa9xx-xxx.bin
Select the firmware file, and then click Open.
4
Firmware upgrade is
93