7. You must now confirm the serial number:
SAS Settings
Use this option to configure or change the SAS settings if you have installed the
IBM BladeCenter Boot Disk System.
Note: You must use this option when configuring an IBM BladeCenter Boot Disk
108
BladeCenter QS21 Type 0792: Problem Determination and Service Guide
PowerPC Firmware
Version HEAD
SLOF-SMS 1.6 (c) Copyright IBM Corp. 2000,2005,2007 All rights reserved.
--------------------------------------------------------------------------------
Enter Serial Number
(Must be 7 characters, only A-Z, a-z, 0-9 allowed)
Enter Serial Number :
---------------------------------------------------------------------------------
Press Enter to continue.
PowerPC Firmware
Version HEAD
SLOF-SMS 1.6 (c) Copyright IBM Corp. 2000,2005,2007 All rights reserved.
--------------------------------------------------------------------------------
Number entered is: ABCDEFG
Accept number?
(Enter 'y' or 'Y' to accept or 'n' or 'N' to decline)
Select Navigation key :
---------------------------------------------------------------------------------
Type y or Y and press Enter to confirm the number.
System for the first time.