Adapter Configuration - IBM QS21 - BladeCenter - 0792 Service Manual

Select an item from the list and enter the appropriate address and subnet mask.
Press Enter when you have finished each item. To save the information and return
to the Main Menu, press M. If you wish to cancel and return to the main menu,
press Esc.

Adapter Configuration

This allows you to set network parameters for the adapter.
Do not change these settings unless required by your network. The defaults are:
v Speed: detected automatically
v Spanning Tree Enabled: disabled
v Protocol: standard.
100
BladeCenter QS21 Type 0792: Problem Determination and Service Guide
PowerPC Firmware
Version HEAD
SLOF-SMS 1.6 (c) Copyright IBM Corp. 2000,2005,2007 All rights reserved.
--------------------------------------------------------------------------------
IP Parameters
NET /axon@10000000000/plb5/plb4/pcix@4000004600000000/ethernet@1
1. Client IP Address
2. Server IP Address
3. Gateway IP Address
4. Subnet Mask
--------------------------------------------------------------------------------
Navigation Keys:
M = return to Main Menu
ESC key = return to previous screen
--------------------------------------------------------------------------------
Type menu item number and press Enter or select Navigation key :
PowerPC Firmware
Version HEAD
SLOF-SMS 1.6 (c) Copyright IBM Corp. 2000,2005,2007 All rights reserved.
--------------------------------------------------------------------------------
Adapter Configuration
NET /axon@10000000000/plb5/plb4/pcix@4000004600000000/ethernet@1
1. Speed, Duplex
2. Spanning Tree Enabled
3. Protocol
--------------------------------------------------------------------------------
Navigation Keys:
M = return to Main Menu
ESC key = return to previous screen
--------------------------------------------------------------------------------
Type menu item number and press Enter or select Navigation key :
Only change this if your network uses the Spanning-Tree Protocol link
management protocol.
IEE 802.3 is the only other option.
[000.000.000.000]
[000.000.000.000]
[000.000.000.000]
[255.255.255.000]
X = eXit System Management Services
X = eXit System Management Services