IBM QS21 - BladeCenter - 0792 Service Manual page 127

PowerPC Firmware
Version HEAD
SLOF-SMS 1.6 (c) Copyright IBM Corp. 2000,2005,2007 All rights reserved.
--------------------------------------------------------------------------------
SAS Settings
1. Change SAS Boot Device Address
2. Change SAS Boot Device LUN Id
--------------------------------------------------------------------------------
Navigation Keys:
M = return to Main Menu
ESC key = return to previous screen
--------------------------------------------------------------------------------
Type menu item number and press Enter or select Navigation key :
Choose 1 to set or change the SAS Boot Device Address. A screen similar to the
following appears:
PowerPC Firmware
Version HEAD
SLOF-SMS 1.6 (c) Copyright IBM Corp. 2000,2005,2007 All rights reserved.
--------------------------------------------------------------------------------
Change SAS Boot Device Address
Current SAS Disk Address (Default = 0) : 0
--------------------------------------------------------------------------------
Navigation Keys:
M = return to Main Menu
ESC key = return to previous screen
--------------------------------------------------------------------------------
Type SAS Address in hexadecimal and press Enter or select navigation key:
The SAS address can be obtained from the Storage System Profile utility. See the
documentation that comes with your IBM BladeCenter Boot Disk System for more
information about the Storage System Profile utility.
Once you have typed the address, press Enter to add the address, then M to return
to the SAS Settings menu.
Choose 2 to set or change the SAS Boot Device LUN ID. A screen similar to the
following appears:
X = eXit System Management Services
X = eXit System Management Services
Appendix A. Using the SMS utility
109