7. You must now confirm the serial number:
SAS Settings
Use this option to configure or change the SAS settings if you have installed the
IBM BladeCenter Boot Disk System or you installed the blade server into an IBM
BladeCenter S unit.
Note: You must use this option when configuring an IBM BladeCenter Boot Disk
80
BladeCenter QS22 Type 0793: Installation and User's Guide
PowerPC Firmware
Version QD0123000
SLOF-SMS 1.1 (c) Copyright IBM Corp. 2007 All rights reserved.
--------------------------------------------------------------------------------
Enter Serial Number
(Must be 7 characters, only A-Z, a-z, 0-9 allowed)
Enter Serial Number :
---------------------------------------------------------------------------------
Press Enter to continue.
PowerPC Firmware
Version QD0123000
SLOF-SMS 1.1 (c) Copyright IBM Corp. 2007 All rights reserved.
--------------------------------------------------------------------------------
Number entered is: ABCDEFG
Accept number?
(Enter 'y' or 'Y' to accept or 'n' or 'N' to decline)
Select Navigation key :
---------------------------------------------------------------------------------
Type y or Y and press Enter to confirm the number.
System or local SAS drives in an IBM BladeCenter S unit for the first time.