Table of Contents
Advertisement
11–Mark and locate functions
EDIT NAME button
Touch this button to open the
you can edit the name of the selected mark.
EDIT TIME button
Touch this button to open the
you can edit the position of the selected mark.
MULTI SELECT button
Use this to enable the selection of multiple marks.
DELETE button
Touch this button to erase the selected mark.
Scroll buttons
Use these buttons to scroll to the beginning or end of
the mark list or scroll one page (five lines) forward or
backward. You can also scroll through the mark list one
line at a time using the DATA dial.
Locating to marks
Touch a
button to locate to the corresponding mark.
Viewing mark information
Touch the
button on the
LIST INFO
to open the LIST INFO page. This screen shows a list of the
number of marks by type in the currently loaded take.
Touch the
button again to return to the
LIST INFO
screen.
LIST
Mark list information screen
NOTE
After recording, the
MARK LIST
number of marks that is 2 or 3 greater than the
TOTAL
sum of the
MANUAL MARK
This is because the total includes
when using prerecording marks that are created during
recording.
110
TASCAM HS-2
screen where
MARK NAME
screen where
MARK EDIT
screen
MARK LIST
MARK
screen might show a
,
,
and
marks.
TIME
OVER
UNLK
,
and
REC
END
PRE
Erasing marks
1 Select the mark that you want to erase on the
screen.
LIST
MARK LIST screen
2 Touch the
button on the
DELETE
When a confirmation pop-up message appears, touch
the
button or the DATA dial to erase the mark.
OK
Erasing a mark using the MARK LIST screen
NOTE
On the
mark list information
the mark or type of mark that you want to delete and
touch the
button to erase all the marks of the
DELETE
same type.
When you do this, a "
Delete all marks of this
" confirmation pop-up appears. Touch the
type?
button or press the DATA dial to erase all the marks of the
same type.
Mark list information screen
Erasing marks using the mark list information screen
MARK
screen.
MARK LIST
screen, you can select
OK
Advertisement
Table of Contents
