Table of Contents
Advertisement
D-IN button:
Synchronize with the clock of the digital signal
selected as the input for DIGITAL IN.
You cannot select an input as the master clock if the
sampling rate converter is ON for that input.
On the second line of the button, the digital input
signal selected is shown.
NOTE
• A
mark appears on the button of the currently
active master clock.
• If synchronization from an external clock is interrupted,
the unit's internal clock becomes active. In this case,
the
mark appears on the
has become the active clock, and the
on the button of the selected external clock that was
lost.
SYNC page
Make settings related to synchronization on this page.
NOTE
If the Option SY-2 has not been installed, the display is
shaded and the setting cannot be selected.
STATUS
Shows the status of the currently loaded project's
sampling frequency and clock synchronization.
TC Chase
Use to turn playback synchronized with timecode
(default).
OFF
Set it to
when you want to match the timing of
ON
this unit's audio with a timecode master device (audio
recorder, video or built-in time code generator).
button to show that it
INT
mark appears
or
ON
10–Internal settings
You can also set timecode offset (TC Offset) with the
timecode master device. Touch the
open the
CHASE Offset
offset value in a range between −
+
(default:
23:59:59.29
00:00:00.00
NOTE
can also be turned
TC Chase
SHIFT and CALL keys at the same time.
TC Rechase
Turn this function, which re-synchronizes when synchro-
nization with timecode becomes inaccurate,
(default).
When set to
, after synchronizing once, input time
OFF
code is ignored and the unit operates in free run mode.
When set to
, set the amount of inaccuracy that triggers
ON
rechasing.
To set the amount of inaccuracy that triggers rechase,
touch the knob and turn the DATA dial to select a value in
frames of
,
,
(default),
1/3
1
2
Master TC
Set whether the unit synchronizes with the built-in
timecode generator or with timecode input from another
device.
Internal button:
Synchronize with the built-in generator.
External button (default):
Synchronize with timecode input from another device.
button to
EDIT
screen where you can set the
and
23:59:59.29
).
and
by pressing the
ON
OFF
or
ON
OFF
or
.
5
10
93
TASCAM HS-2
Advertisement
Table of Contents
