Output Page; Level Meters Settings (Meter Setup) - Tascam HS-2 Owner's Manual

OUTPUT page

This shows the output setting and signal route.
METER buttons
Use these buttons to set whether the meter shows the
position before or after the fader.
Touch the button on the left to show the level before the
fader or touch the button on the right to show the level
after the fader on the meter.
Post/Pre Fader buttons
Use these buttons to set whether the headphone output
is from before or after the fader.
Pre Fader button:
Signals before the fader are output for headphones.
Post Fader button (default):
Signals after the fader are output for headphones.
Fader
When RC-HS20PD is connected, the RC-HS20PD fader
level is shown.
When it is not connected, it is fixed at 0dB.
10–Internal settings

Level meters settings (METER SETUP)

Make level meter settings on this screen.
Metering Point
Set whether the meters show the signal before or after
the faders.
: Meters show the signal before the faders (default).
: Meters show the signal after the faders. In this case,
the button appears light blue.
Ref. Level Line
Touch to turn the reference level line that appears on the
level meter (default) or
ON OFF
Reference level line display ON
Over Level
Use this to set the level at which the overload indicator
lights. The peak indication level is this amount below the
maximum level (full scale).
Touch this knob and use the DATA dial to adjust the level.
Options: (default),
–0.20 dB
, , .
dB –0.06 dB –0.03 dB
This setting is reflected in the
the item on the
Auto Marker
screen.
SETUP
Peak Hold Time
Use this to set the peak hold time.
Touch this knob and use the DATA dial to adjust the time.
Options: , ,
0 sec 1 sec 2 sec
forever).
Release Time
Use this to set the release time.
Touch this knob and use the DATA dial to adjust the time.
Options: , (default) and
Slow Normal
NOTE
If you press the EXIT/CANCEL (PEAK CLEAR) key when
the Home Screen is open, the peak hold display resets.
.
, ,
–0.17 dB –0.13 dB –0.10
setting of
Audio Over
page of the
OPTIONS REC
(default) and (hold
inf
Fast
101
TASCAM HS-2