Table of Contents
Advertisement
10–Internal settings
PARALLEL page
Set the AUX 1-3 functions of the PARALLEL connector.
AUX Assign
Touch a knob to select it, making the background yellow,
and turn the DATA dial to set the parameter.
The parameters that can be selected include
,
,
MARK
MARK SKIP–
MARK SKIP+
AUX1 Function:
Set the function of PARALLEL connector pin 17 (AUX1)
(default:
).
MARK SKIP+
AUX2 Function:
Set the function of PARALLEL connector pin 18 (AUX2)
(default:
).
MARK SKIP–
AUX3 Function:
Set the function of PARALLEL connector pin 19 (AUX3)
(default:
).
MARK
RS–232C page
Make RS-232C serial control transmission settings on this
page.
Serial Mode
Set the serial connection mode with the following
buttons.
Setting buttons:
(Default),
RS-232C
NOTE
• The RS-232C and RS-422 connectors cannot both be
used at the same time. Only the connector selected
with this setting is operable.
• This setting is synchronized with the
item on the
page.
RS-422
• If the Option SY-2 has not been installed,
cannot be selected.
Baud Rate (bps)
Set the transmission speed (baud rate) with these buttons.
Setting buttons (bps):
4800
(default)
96
TASCAM HS-2
,
F.FWD
REW
,and
.
CALL
RS-422
Serial Mode
RS-422
,
,
and
9600
19200
38400
DATA Length
Set the DATA length in bits with these buttons.
Setting buttons (bits):
Parity Bit
Set whether or not there is a parity bit with these buttons.
Setting buttons:
NONE
Stop Bit
Set the stop bit with these buttons. The options are 1
(default setting) and 2.
Setting (bit):
(default) or
1
RS–422 page
Make RS-422 serial control transmission settings on this
page.
,
NOTE
If the Option SY-2 has not been installed, the display is
shaded and the setting cannot be selected.
Serial Mode
Set the serial connection mode with the following
buttons.
Setting buttons:
RS-232C
NOTE
• The
and
RS-232C
used at the same time. Only the connector selected
with this setting is operable.
• This setting is synchronized with the
item on the
RS-232C
• If the Option SY-2 has not been installed,
cannot be selected.
or
(default)
7
8
(default),
and
.
EVEN
ODD
2
(Default),
RS-422
connectors cannot both be
RS-422
Serial Mode
page.
RS-422
Advertisement
Table of Contents
