Table of Contents
Advertisement
8 – Recording
Adding marks manually when record-
ing
You can manually add a mark to a file where you want it when
recording, allowing you to find that point again quickly during
playback.
NOTE
i Marks cannot be added manually when the current medium
is CD.
i Moving between marks is only possible when stopped, play-
ing back or in playback standby. (See "Moving to marks" on
page 87.)
Adding marks when recording
When recording or in recording standby and the Home Screen is
open, press the MULTI JOG dial to add a mark at that point.
The number of the added mark will be shown on a pull-up at the
bottom of the display.
NOTE
i Marks added to files by this unit during recording are stored
in the files themselves. These marks can be used when play-
ing back the file using software or equipment that supports
the BWF format.
i The maximum number of marks that can be added to a file is
99. The mark data is stored in the file.
i You can also add marks when the unit is stopped, playing
back or in playback standby. (See "Adding marks" on page
87.)
i A mark added manually will be named MARKxx.*
* The xx is a number given to all marks that is incremented in
order.
Adding marks automatically when
recording
By turning the auto mark function on, you can have the unit add
marks automatically when audio level overloads occur or when
synchronization errors occur because external clock is lost. Using
this function, you can quickly search for points where problems
occurred during recording.
When the automatic mark function is on, the
in the recording function activation status area on the recording
screen.
1.
Select the AUTO MARK item on the REC 5 page to open the
AUTO MARK screen. (See "Menu operation procedures" on
page 22.)
68
TASCAM SS-CDR250N / SS-R250N
2.
Set the following automatic mark function settings.
OVER
Add a mark whenever the audio level reaches 0 dB (full
bit).
Options: OFF (default), ON
TIME
Set a time interval for adding marks automatically.
Options: OFF (default), 1min, 10min, 15min, 30min,
UNLOCK
Add a mark whenever synchronization with the external
clock is lost.
Options: OFF, ON (default)
REC
Add a mark whenever recording starts if the pre-recording
function is on.
Options: OFF (default), ON
BOF
Add a mark when a buffer overflow occurs.
Options: OFF, ON (default)
NOTE
When the AUTO MARK screen is open, use the m [A-B] and
, [INPUT] buttons to move the cursor between setting
items.
3.
When the cursor is at the BOF item, press the MULTI JOG
dial to confirm the setting and return to the menu.
NOTE
i The automatic mark function is disabled when the current
medium is CD. In this case, the REC 5 page AUTO MARK item
will appear as "-------".
i After an OVER or UNLOCK mark is added, the same type of mark
will not be added again until at least 10 seconds have passed.
i When an OVER occurs, a mark named OVERxx* will be added.
i For TIME, a mark named TIMExx* will be added.
i For UNLOCK, a mark named UNLKxx* will be added.
i For REC, a mark named RECxx* will be added.
i For BOF, a mark named BOFxx* will be added.
* The xx is a number given to all marks that is incremented in
order.
icon appears
220Hz
Advertisement
Table of Contents
