Table of Contents
Advertisement
Mark functions
Adding marks
Use the following methods to create marks.
One timeline mode or one take can have a maximum of
99 marks, including automatically-created marks.
8 Push the MARK key on the front panel.
Press the MARK key to add a mark at that playback/
recording time. In timeline mode, marks are added to the
timeline and file itself.
Mark names are in the format "
8 Use the auto marker function
When the auto marker function is ON, marks can be
added upon PREREC start/ recording start / end when
audio overs occur, at regular time intervals and when
synchronization errors occur (see "OPTIONS page" on page
90.)
In timeline mode, marks are added to the timeline and file
itself.
Marks are named according to how they were made.
When auto marks are made
When audio over occurs
At every time interval
When a synchronization error
occurs
CAUTION
The following auto marks are only added to the file (take),
and will not appear in the timeline in timeline mode.
When auto marks are made
Recording start point
Recording end point
Pre-recording start point
11–Mark and locate functions
".
MARK XX
Mark name
OVER xx
TIME xx
UNLK xx
Mark name
REC xx
END xx
PRE xx
NOTE
• "Audio Over" occurs when the level exceeds the
maximum level (full scale) minus the value set by the
user. (In the example above, this would be when the
level exceeds the maximum level minus 0.20 dB.)
• If a mark is triggered using parallel control, a mark is
added in the same manner as if the MARK key had
been pushed.
• When an Audio Over or Synchronization Error auto
marker is added, an additional event of that same
type will not cause a mark to be added until at least 10
seconds have passed.
Using keys to locate to marks
Press the . [MARK .] or / [MARK /] key
while pressing and holding the SHIFT key to locate to the
previous or next mark.
NOTE
If MARK SKIP +/– is input using parallel control, the unit
will locate to the next or previous mark.
Mark list screen
Touch the
button on the Home Screen to
Mark List
open the
screen.
MARK LIST
NAME buttons
Touch to sort by mark name in descending or ascending
order.
When the mark names are sorted in ascending order, a
icon appears inside the
NAME
order, a
icon appears inside this button.
TIME buttons
Touch to sort marks by time in descending or ascending
order. When they are sorted by time in ascending order,
a
icon appears inside the
descending order, a
icon appears inside this button.
Mark name buttons
Touch to select a mark.
LOCATE (
) buttons
Touch one of these to locate to the corresponding mark.
LIST INFO button
Touch this to see a list of the number of marks by type in
the currently selected take.
button. When in descending
button. When in
TIME
109
TASCAM HS-2
Advertisement
Table of Contents
