Project Operations; Creating New Projects - Tascam HS-2 Owner's Manual

• CREATE PLAYLIST button
This shows the screen for creating a new playlist.
• MENU button
Touch to open a pull-up menu where you can select
, and
LOAD EDIT NAME DELETE
• Scroll buttons
Use these buttons to scroll to the beginning or end of
the playlist or scroll one page (five lines) forward or
backward. You can also scroll through the playlist one
line at a time using the DATA dial.

Project operations

Creating new projects

1 Press the PROJECT key on the front panel to open
the screen.
PROJECT
2 Touch the
CREATE PROJECT
screen to open the
CREATE PROJECT
This screen has three pages.
CREATE PROJECT screen 1
You can make the following settings on this screen.
8 Project Name
Touch the
Project Name
screen where you can edit the project name.
The maximum number of characters for project and
session names is 31. Extra characters are discarded.
8 Session Name
Touch the
Session Name
screen where you can change the name of
Session
the first session.
On the
1st Session
number of characters allowed is indicated by a
yellow background.
8 Fs
Set that sampling frequency of the project.
8 NEXT button
Touch to open the next page.
8 CREATE PROJECT button
Touch this to create a project with the current
settings. If a project with the same name already
exists, this button appears gray and you will not be
able to create a new project.
.
button on the
PROJECT
screen.
button to open the
button to open the
1st
screen, the maximum
3 After you complete making settings, touch the
button.
NEXT
CREATE PROJECT screen 2
You can make the following settings on this screen.
8 Frame Type
Set the time code frame type.
8 Bit Length
Set the bit length used during recording.
8 PREV button
Open the previous screen.
4 After you complete making settings, touch the
button.
NEXT
CREATE PROJECT screen 3
You can make the following settings on this screen.
8 TIMELINE START TIME
Set the starting time used in timeline mode. Touch
the button to open a screen where you can
EDIT
change the starting time.
8 OTHERS
Touch the
Current Setting
current settings of other parameters when creating
the project or touch
default settings.
5 After you complete making settings touch the
button.
CREATE PROJECT
NOTE
• If a project with the same project name already exists,
the
CREATE PROJECT
will not be able to create a new project. If this happens,
change the project name.
• On screens 2 and 3, touch the
the previous screen.
5–Projects
button to use the
to use the
Factory Preset
button appears gray and you
button to return to
PREV
37
TASCAM HS-2