Operation Mode Selection (Operation Mode); Folder Structure; File Names - Tascam HS-2 Owner's Manual

10–Internal settings
Operation mode selection (OPERATION
MODE)
Set the unit's operation mode on this page.
After selecting an operation mode, touch the
to switch to it and return to the Home Screen.
TIMELINE MODE
The timeline mode becomes active and the Home Screen
reopens.
TAKE MODE
The take mode becomes active and the Home Screen
reopens.
PLAYLIST MODE
The playlist mode becomes active and the Home Screen
reopens.
108
TASCAM HS-2

Folder structure

The folder structure is as shown below.
You can check the SD card/CF card folder and file structure
by accessing it from a computer using a card reader, for
example.
Be aware, however, if you change or erase files inside a
project, or change any names, the HS-2 might not be able
to play that project.
NOTE
Other management files and folders are created in
addition to these.

File names

button
SET
The format used in naming files is as follows.
[Take name first half ]-[letter][take number].wav
ROOT
├─ Project01
│ │
│ │
│ │──
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
*1: This AES31 file is automatically created
*2: This PPL file is automatically created
Session001
│
├─ defaultAES.adl *1
├─ Session001-T001.wav
├─ Session001-T002.wav
│ :
├─ Session001.adl
│
└─ _playlists
│
├─ defaultPPL.ppl *2
├─ Playlist01.ppl
├─ Playlist02.ppl
│
:
├─ exportedPPLFile.ppl
│
:
├─ PPLFileforImport.ppl
│
: