Locating To Marks; Viewing Mark Information; Erasing Marks - Tascam HS-4000 Owner's Manual

Locating to marks

Touch a button to locate to the corresponding mark.

Viewing mark information

Touch the LIST INFO button on the
open the LIST INFO page. This screen shows a list of the number
of marks by type in the currently loaded take.
Touch the LIST INFO button again to return to the
LIST screen.
Mark list information screen
NOTE
After recording, the M A R K L I S T screen might show a
marks that is 2 or 3 greater than the sum of the
and U N L K marks. This is because the total includes REC, END and PRE (when
using prerecording) marks that are always created during recording.

Erasing marks

1. Select the mark that you want to erase on the
screen.
L I S T
MARK LIST screen
2. Touch the
D E L E T E button on the
When a confirmation pop-up message appears, press the
button or the DATA dial to erase the mark.
O K
Erasing a mark using the MARK LIST screen
MARK LIST screen to
MARK
T O T A L number of
M A N U A L M A R K , T I M E , O V E R
M A R K
M A R K L I S T screen.
11 – Mark and locate functions
NOTE
On the m a r k l i s t i n f o r m a t i o n screen, you can select the mark or type of
mark that you want to delete and press the
marks of the same type.
When you do this, a "Delete all marks of this type?" confirmation pop-up
appears. Touch the O K button or press the DATA dial to erase all the marks of
the same type.
Mark list information screen
Erasing marks using the mark list information screen
TASCAM HS-4000
D E L E T E button to erase all the
85