Locating To Marks; Viewing Mark Information; Erasing Marks; Editing Marks - Tascam HS-8 Owner's Manual

7 – Mark and Locate Functions

Locating to marks

Touch the " " button to locate to that mark.

Viewing mark information

Touch the button on the
LIST INFO
open the page.
LIST INFO
This shows a list of the number of marks by type in the
currently loaded take.
Touch the button again to return to the
LIST INFO
screen.
LIST
LIST INFO page of the MARK LIST screen
NOTE
After recording, the MARK LIST screen might show a TOTAL number
of marks that is 2 or 3 greater than the sum of the MANUAL MARK,
TIME, OVER and UNLK marks. This is because the total includes REC,
END and PRE (when using prerecording) marks that are always
created during recording.

Erasing marks

1 Select the mark that you want to erase on the
screen or type of mark that you want to erase
LIST
on the page.
LIST INFO
MARK LIST screen
LIST INFO page
56
TASCAM HS-8
screen to
MARK LIST
MARK
MARK
2 Touch the button.
DELETE
3 When a confirmation pop-up message appears,
press the button or the
OK
mark or marks.
Erasing a mark using the MARK LIST screen
Erasing marks using the LIST INFO page

Editing marks

Marks added by using the MARK key (marks with names in
the "MARK XX" format) can be edited.
NOTE
Automatically placed marks cannot be edited.
1 Select the mark that you want to edit on the
screen.
LIST
2 Touch the button to open the
Edit
screen. Touch the
FRAME EDIT
or not the frame value can be edited.
dial to erase the
DATA
MARK
MARK EDIT
button to set whether