Tascam HS-2 Owner's Manual page 125

Message
PLEASE CONFIRM
Export System Backup Data to
MM?
PLEASE CONFIRM
Import All System Backup Data
from MM?
PLEASE CONFIRM
Import User Preset Data from
System Backup Data on MM?
PLEASE CONFIRM
Load Factory Preset?
PLEASE CONFIRM
Load User Preset?
PLEASE CONFIRM
Save current setting
to User Preset?
Project Delete failed.
Project Load failed.
Project Rename failed
Project save failed.
Project Screen
is not available
in Jog Mode
Project Screen
is not available
while Recording
--- QUICK FORMAT ---
FORMAT MM?
This will erase all DATA on card
--- QUICK FORMAT ---
Formatting MM ...
QUICK FORMAT MM &
Create Project?
"pppppppp"
"ssssssss"
fs/bit/FrameType
Reading DATA ...
Reading Media ...
Rebuild all Projects?
Rebuild changed Directory?
Rebuild current Project?
Rebuild current project
and changed Directory?
Rebuild current session
and changed Directory?
Rebuild current Session?
Details and responses
Reconfirms that you want to export system backup data to the
media.
Reconfirms that you want to import all system backup data
from the media.
Reconfirms that you want to import user preset data from sys-
tem backup data on the media.
Reconfirms that you want to load the factory settings.
Reconfirms that you want to load the user preset settings.
Reconfirms that you want to save the current settings as the
user preset settings.
Failed to delete the project.
Failed to load the project.
Failed to rename the project.
An error occurred while saving the project, and saving failed.
Use the CLOSE button to close the pop-up window.
The FAT file system might be broken.
Format the CF card or use a different one.
Formatting will erase all DATA on the card.
The project screen cannot be changed when in jog mode.
The plroject screen cannot be changed during recording.
Quick formatting will be performed.
Quick formatting is occurring.
Quick formatting will be executed and a project will be cre-
ated.
DATA is being read.
The media is being read.
Rebuild all projects.
Rebuild the changed directory.
Rebuild the current project.
Rebuild the current project and changed directory.
Rebuild the current session and changed directory.
Rebuild the current session.
16–Messages
Remarks
MM = SD or CF
MM = SD or CF
MM = SD or CF
MM = SD, CF, or USB memory
MM = SD, CF, or USB memory
MM = SD or CF
"pppppppp" = name of the created project
"ssssssss" = name of the first created session
fs: sampling frequency
bit: bit rate
Frame Type: frame type
This message appears when you operate a
file on this unit via FTP or on the BROWSE
screen, and then touch the REBUILD button
with the mark.
B
This message appears when you operate a
file on this unit via FTP or on the BROWSE
screen, and then touch the REBUILD button
with the mark.
B
This message appears when you operate a
file on this unit via FTP or on the BROWSE
screen, and then touch the REBUILD button
with the mark.
B
TASCAM HS-2
125