Removing The Designated Fade (Remove Fade In/ Remove Fade Out); Setting The Playback Level In The Designated Region (Level) - Tascam HS-2 Owner's Manual

Removing the designated fade (Remove Fade
IN/ Remove Fade Out)
1 Press the HOME key to display the Home Screen.
2 Touch the
EDIT MODE
mode.
3 Move the timeline cursor to the region where you
want to remove fade in/fade out.
4 Touch the
Fade / Level
pull-up menu.
• To remove fade in, touch the
button.
• To remove fade out, touch the
button.
5 When removal is complete, the Home Screen will
be displayed after the pop-up window is displayed.
In this case, the
Fade / Level
remain open.
button to enter the edit
button to display the
Remove Fade IN
Remove Fade Out
pull-up menu will
7–Timeline mode
Setting the playback level in the designated
region (Level)
You can set playback level for the entire designated region
(after fade in − before fade out).
1 Press the HOME key to display the Home Screen.
2 Touch the
EDIT MODE
mode.
3 Move the timeline cursor to the region where you
want to remove fade in/fade out.
4 Touch the
Fade / Level
pull-up menu.
5 Touch the button on the pull-up menu.
Level
The region under the timeline cursor is indicated in
yellow, and is the target for Level setup.
6 When the level knob is displayed on the
ton, use the dial to set playback level.
DATA
Setting range
∞
− , −120dB to +10.0dB
7 Touch the button again to close the level
Level
knob.
(The playback level will be retained.)
button to enter the edit
button to display the
but-
Level
61
TASCAM HS-2