Control Panel; Removing The Control Panel - Xerox 2135DX - Phaser Color Laser Printer Service Manual

Control panel

Warning Switch off the power and disconnect the power cord.
1. Remove the top cover as detailed in "Top cover" on page 88.
2.
Remove the screw securing the left side of the control panel.
3.
Lift the control panel and disconnect CN1 from the back of the panel.
4. Remove the control panel.
Remove
Screws

Removing the control panel

Reverse these steps to install the control panel.
Control Panel Bezel (removed
when top cover is removed
Control Panel
Disconnect
Harness
0725-29
Service Guide 115