Eject Guide Assembly; Removing The Eject Guide Assembly - Xerox 2135DX - Phaser Color Laser Printer Service Manual

Eject guide assembly

Warning
Switch off the power and disconnect the power cord.
1.
Open the top cover. Remove the drum/toner cartridges. Place them in
a lightproof black bag to protect the drum units from light and store in a
safe place.
2.
Remove the top cover inner frame as detailed in "Top cover inner frame
and front/rear top cover spring assembly" on page 102.
3.
Remove the five screws securing the eject guide assembly to the top
cover inner frame.
4.
Remove the eject guide assembly.
Remove
Screws

Removing the eject guide assembly

Reverse these steps to install the eject guide assembly.
138 Phaser 2135 Color Printer
Eject Guide Assembly
0725-45