Removing The Registration Roller Assembly A And Drive Gear - Xerox 2135DX - Phaser Color Laser Printer Service Manual

7. Remove the E-ring securing the drive gear to the right end of the
registration roller shaft.
8. Remove the drive gears.

Removing the registration roller assembly A and drive gear

Reverse these steps to install the registration roller assembly A and drive gear.
Install the drive gear so that it drives the roller in the direction of paper travel.
The blue plastic face should face the outside, next to the E-ring.
128 Phaser 2135 Color Printer
Remove
Screws
Registration
Roller Assembly A
Remove
E-Ring
Drive Gear
0725-38