Ram Dimms; Removing The Ram Dimms - Xerox 2135DX - Phaser Color Laser Printer Service Manual

RAM DIMMs

Warning
Switch off the power and disconnect the power cord.
1.
Remove the system controller board as described in the procedure
"System controller board" on page 105.
2.
Spread apart the latches securing each end of the RAM DIMM
connector.
3.
Lift the DIMM out of the connector.

Removing the RAM DIMMs

Reverse these steps to install the RAM DIMMs
Note Do not mix 256 Mbyte RAM DIMMs with small -size RAM
DIMM.
106 Phaser 2135 Color Printer
0725-71