High Voltage Power Supply - Xerox 2135DX - Phaser Color Laser Printer Service Manual

High voltage power supply

Warning
Switch off the power and disconnect the power cord.
1.
Remove the printer unit chassis as detailed in the topic "Printer unit
chassis" on page 100.
2.
Disconnect CN1 from the high voltage power supply.
3. Disconnect CN3 from the low voltage power supply.
4.
Remove the three screws securing the high voltage power supply to the
chassis.
5.
Lift the high voltage power supply and the contact assembly and
remove.
112 Phaser 2135 Color Printer