Loading Paper Into The A3/11 × 17 Tray Unit; Loading Paper Into Tray 2 And 3 - Ricoh Pro C550EX Operating Instructions And Troubleshooting

Loading Paper into the A3/11 × 17 Tray Unit
This section describes how to load paper into the A3/11 × 17 tray unit. To use the A3/11 × 17 tray unit,
you must replace tray 1.
• Make sure the paper stack is flush to the right side fence.
• The tray can hold up to 1,100 sheets of paper. Do not stack paper over the limit mark.
1. Carefully pull out the paper tray until it stops.
2. Place the paper print side down along the edge on the left.
3. Carefully slide the paper tray fully in.

Loading Paper into Tray 2 and 3

This section describes how to load paper into tray 2 and 3.
• Various sizes of paper can be loaded in tray 2 and 3 by adjusting the positions of side fences and
end fence.
• Check the paper edges are aligned with the right side.
BAZ016S
BAZ017S
Loading Paper
3
45