❖ Reception Settings
Switch Reception Mode
Authorized RX
Forwarding
RX File Print Qty
2 Sided Print
RX Reverse Printing
Paper Tray
Specify Tray for Lines
Checkered Mark
Center Mark
Print Reception Time
❖ E-mail Settings
Internet Fax Settings
Max. E-mail Size
SMTP RX File Delivery Settings
10
Function name
Function name
Description
Specify the method for receiving fax documents.
Specify whether or not unwanted fax docu-
ments are to be screened out.
Specify whether or not received fax docu-
ments are to be forwarded to a programmed
receiver.
Specify the number of copies to be printed
for each fax document received.
Specify whether or not received fax docu-
ments are to be printed on both sides of the
paper.
Specify whether or not received fax documents
are to be printed from the last page received.
Use this function to print fax documents re-
ceived from programmed senders and fax
documents from other senders, using differ-
ent paper trays.
Specify a paper tray for each line (telephone,
Internet Fax, IP-Fax).
Specify whether or not a checkered mark is
to be printed on the first page of received fax
documents.
Specify whether or not a center mark is to be
printed halfway down the left side and at the
top center of each page received.
Specify whether or not the received date,
time, and file number are printed at the bot-
tom of received fax documents.
Description
You can select to display
When the other party has a limit on the size
of e-mail messages that can be received, or
sending data heavy e-mail causes problems,
you can make settings to limit the size of sent
e-mail.
This function is available on systems that al-
low routing of e-mail received via SMTP.
or not.