Reception Settings - Ricoh 8025e Operating Instructions Manual

Reception Settings

This section describes the user tools in the Reception Settings menu under Fac-
simile Features.
❖ Switch Reception Mode
Specify the method for receiving fax documents.
The default setting is Auto Reception.
❖ Authorized RX (Authorized Reception)
Specify whether or not unwanted fax documents are to be screened out.
The default setting is Off.
❖ Forwarding
Specify whether or not received fax documents are to be forwarded to a pro-
grammed receiver.
The default setting is Off.
❖ RX File Print Qty (Reception File Print Quantity)
Specify the number of copies to be printed for each fax document received.
The default setting is 1 set(s).
• 1 to 10 set(s)
❖ 2 Sided Print
Specify whether or not received fax documents are to be printed on both sides
of the paper.
The default setting is Off.
❖ RX Reverse Printing (Reception Reverse Printing)
Specify whether or not received fax documents are to be printed from the last
page received.
The default setting is Off.
❖ Paper Tray
Use this function to print fax documents received from programmed senders
and fax documents from other senders, using different paper trays.
The default setting is Auto Select.
Display of tray names may differ depending on the options installed.
❖ Specify Tray for Lines
Specify a paper tray for each line (telephone, Internet Fax, IP-Fax).
The default setting is Off.
A Press [Facsimile Features].
B Press [Reception Settings].
C Press [Specify Tray for Lines].
Reception Settings
97
4