Ricoh Aficio MP 3500SP Facsimile Reference Manual page 134

Other Transmission Features
G
Press [Only Once] or [Save] to delete or save the file after transmission.
To delete the original immediately after transmission, select [Only Once].
To repeatedly send the original, select [Save].
To cancel Polling Transmission, press [Cancel]. The display returns to that of
C
step .
H
Press [OK].
2
"pppppppppp" appears.
The type of Polling Transmission is shown above the highlighted [Polling TX].
I
Press [OK].
To check the settings, press [Transmission Mode].
J
Press the {Start} key.
Note
❒ A Polling ID may be any four numbers (0 to 9) and characters (A to F), ex-
cept 0000 and FFFF.
❒ Free Polling and Default ID Transmission allow only one file to be stored
in memory.
❒ ID Override Polling Transmission allows a file to be stored in memory for
each ID. For the maximum number of files you can store in memory by
changing IDs, see "Maximum Values".
❒ You can set whether a Polling Transmission file is deleted in User Param-
eters (switch 11, bit 7) in the Facsimile Features menu. To save a file for fre-
quent sending, set to "Standby (Save)".
❒ Polling Transmission Clear Report allows you to verify Polling Transmis-
sion has taken place.
❒ You can program one of the Quick Operation keys with operations for this
function. Using this key allows you to omit step
❒ The communication fee is charged to the receiver.
❒ You can cancel the transmission setup for Polling Transmission. See "Be-
fore the Transmission Is Started".
Reference
p.107 "Before the Transmission Is Started"
p.125 "Polling Transmission Clear Report"
p.230 "Information Boxes"
p.291 "Maximum Values"
"Facsimile Features", General Settings Guide
124
B
.