Updating The License Key; Unix; Windows - Novell SENTINEL 6.1 SP2 - INSTALLATION GUIDE 02-2010 Installation Manual

3.11 Updating the License Key

If you purchase the product after evaluation, follow the procedure given below to update your
license key in the system to avoid re-installation.
Section 3.11.1, "Unix," on page 69

Section 3.11.2, "Windows," on page 69


3.11.1 Unix

1 As the Sentinel Administrator operating system user, log in to the machine where the DAS
component is installed (The default is
2 In the command prompt, change the directory to
3 Enter the following command:
./softwarekey.s h
4 Specify number 1 to set your primary key, then press Enter.

3.11.2 Windows

1 As a user with administrative rights, log in to the machine where the DAS component is
installed.
2 In the command prompt, change directory to
3 Enter the following command:
.\softwarekey.bat
4 Specify number 1 to set your primary key, then press Enter.
).
esecadm
$ESEC_HOME/bin
%ESEC_HOME%\bin
.
.
Installing Sentinel 6.1 SP2 69