Chapter 8, "Crystal Reports For Linux," On - Novell SENTINEL 6.1 SP2 - INSTALLATION GUIDE 02-2010 Installation Manual

NOTE: The steps in the standard installation for Crystal Enterprise Server must be followed before
performing this step. For more information on installing Crystal Enterprise Server, see
"Crystal Reports for Linux," on page
To edit the tnsnames.ora file:
1 Log in to the server with Crystal Enterprise Server installed and locate the
2 Modify the
ESECURITYDB
address must be the virtual IP address.
A sample file for a system with three nodes is shown below:
ESECURITYDB =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.0.0.1)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.0.0.2)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.0.0.3)(PORT = 1521))
(LOAD_BALANCE = yes)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = REPORT.novell.com)
(FAILOVER_MODE =
(TYPE = SELECT)
(METHOD = BASIC)
(RETRIES = 180)
(DELAY = 5)
)
)
)
125.
service to show the TNS information for all of the nodes. The IP
tnsnames.ora
Sentinel with Oracle Real Application Clusters 175
Chapter 8,
file.