Configuring The Sentinel Control Center To Integrate With Crystal Reports Server - Novell SENTINEL 6.1 SP2 - INSTALLATION GUIDE 02-2010 Installation Manual

Turning Off Aggregation
1 Log in to Sentinel Control Center.
2 Click Admin, then click Reporting Data.
3 Disable the following summaries:
 EventDestSummary
 EventSevSummary
 EventSrcSummary
4 In the Status column, click Active until it changes to InActive.
Disabling EventFileRedirectService
1 At your DAS machine, using the text editor, open the following file:
For UNIX:
$ESEC_HOME/config/das_binary.xml
For Windows:
%ESEC_HOME%\config\das_binary.xml
2 For
EventFileRedirectService
<property name="status">off</property>
3 Restart the DAS component:
On Windows: Use the Service Manager to stop and start the Sentinel service
7.8.7 Configuring the Sentinel Control Center to Integrate with
Crystal Reports Server
You can view Crystal Reports from Sentinel Control Center by integrating Crystal Reports Server to
the Sentinel Control Center
To enable Sentinel Control Center integration with Crystal Reports Server, perform the following
instructions:
NOTE: This configuration must be performed only after Crystal Reports Server has been installed
and Crystal Reports have been published to it.
1 Log in to Sentinel Control Center as a user who has privileges to access the Admin tab.
2 In the Admin tab, select Crystal Report Configuration.
3 In the Analysis URL field, provide the following:
http://<hostname_or_IP_of_web_server>/
GetReports.asp?APS=<hostname>&user=Guest&password=&tab=Analysis
, change the status to off:
Crystal Reports for Windows 121