Starting The Installation - Novell SENTINEL 6.1 SP2 - INSTALLATION GUIDE 02-2010 Installation Manual

 Sentinel Services
Communication Server

Correlation Engine

 Data Access Server (DAS)
Sentinel Collector Service (Collector Manager)

Applications

 Sentinel Control Center
Sentinel Data Manager

Sentinel Solution Designer

Ensure that the prerequisites mentioned in
page 31 are met before you proceed with installing Sentinel.
The Sentinel Database components should always be installed first. Other components can be
installed at the same time if the system architecture includes multiple components on the database
machine. The procedure below shows the steps for installing all the components on the same
machine; a distributed installation includes a subset of the steps below.
Section 3.7.1, "Starting the Installation," on page 43

Section 3.7.2, "Configuring the Database on Windows," on page 48

 Section 3.7.3, "Configuring the Database on Linux or Solaris," on page 49
Section 3.7.4, "Completing the Installation," on page 51

Section 3.7.5, "Console Installation on Linux or Solaris," on page 52


3.7.1 Starting the Installation

1 Log in as the
user on Solaris/Linux or the
root
To install the Sentinel Database components on Windows when the target MS SQL Server
instance is in Windows Authentication only mode, you must log in to Windows as a System
Administrator database user.
2 Extract the
<SENTINEL_6.1.2.zip>
The files are extracted to disk1 folder.
3 From the disk1 folder, run the following script:
Windows:

setup.bat
 Solaris/Linux:
GUI mode:
./setup.sh
Textual (headless) mode:
./setup.sh –console
You cannot run the installer on UNIX from a directory path that has special characters such as
a space or non-ASCII characters.
4 Click the down-arrow and select one of the following language choices:
Section 3.4, "General Installation Prerequisites," on
administrator
file to a location of your choice.
user on Windows.
Installing Sentinel 6.1 SP2 43