Novell SENTINEL 6.1 SP2 - INSTALLATION GUIDE 02-2010 Installation Manual page 78

32b In the Configure Action window, specify the following:
32c Click Save.
33 Open the Correlation Rule Manager window.
34 Select a rule and click the Deploy rules link.
The Deploy Rule window is displayed.
35 In the Deploy rule window, select the Engine to deploy the rule from the drop-down list.
36 Select the action that you created in
37 Select Correlation Engine Manager.
In the Correlation engine, you can see the rule is deployed/enabled.
38 Click the Active Views tab and verify that the Correlated Event is generated.
39 Close the Sentinel Control Center.
40 Double-click the Sentinel Data Manager (SDM) icon on the desktop.
41 Log in to SDM using the Database Administrative User specified during installation (esecdba
by default).
78 Sentinel 6.1 Installation Guide
Specify the action name. For example, CorrelatedEvent Action.

Select Configure Correlated Event from the Action drop-down list.

 Set the Event Options.
Set the Severity to 5.

Specify the EventName. For example, CorrelatedEvent.

 Specify a message if required.
Step 32 on page 77 to associate with the rule and click OK.