Using The Crystal Xi R2 Web Server; Testing Connectivity To The Web Server; Setting A "Named User" Account - Novell SENTINEL 6.1 SP2 - INSTALLATION GUIDE 02-2010 Installation Manual

11 Click Browse and browse to the location of the report templates you want to add. Pick a folder
and select a report.
12 Highlight SentinelReports, click Show Subfolders.
13 Select the appropriate folder for the report, click Show Subfolders.
14 Click Submit.
15 To add the remaining reports, repeat steps 9 to 17 until all reports have been added.

8.5 Using the Crystal XI R2 Web Server

Crystal Reports Server XI on Linux installs a Web Server through which you can perform
administrative tasks as well publish and view reports.
The administrative portal is accessed through your browser at the following URL:
http://<hostname_or_IP_of_web_server>:<web_server_port_default_8080>/
businessobjects/enterprise115/adminlaunch
The non-administrative (general use) portal is accessed through your browser at the following URL:
http://<hostname_or_IP_of_web_server>:<web_server_port_default_8080>/
businessobjects/enterprise115

8.5.1 Testing connectivity to the Web Server

To test connectivity to the Web Server:
1 Go to another machine that is on the same network as your Web Server.
2 Provide
http://<hostname_or_IP_of_web_server>:<web_server_port_default_8080>/
businessobjects/enterprise115/adminlaunch
You should get a Crystal BusinessObjects Web page.

8.5.2 Setting a "Named User" Account

The license key supplied with Crystal Reports Server is a Named User account key. The Guest
account has to be changed from Concurrent User to Named User.
To set the Guest Account as Named User:
1 Open a Web browser and provide the following url:
http://<hostname_or_IP_of_web_server>:<web_server_port_default_8080>/
businessobjects/enterprise115/adminlaunch
2 Click Central Management Console.
3 The System Name should be your host computer name. Authentication Type should be
Enterprise. If not, select Enterprise.
4 In the Organize pane, click Users > Guest.
5 Change connection type from Concurrent User to Named User; Click Update.
Logoff and close window.
136 Sentinel 6.1 Installation Guide