Novell SENTINEL 6.1 SP2 - INSTALLATION GUIDE 02-2010 Installation Manual page 63

 Linux/Solaris:
$ESEC_HOME/config
4 Set the ownership and permissions of the certificate file as follows:
Windows: Not applicable

 Linux/Solaris: Run the following commands:
:
chown esecadm
chmod 700 <Install_Directory>/config/<cert-file>
5 Switch to user:
esecadm
Windows: Not applicable

 Linux/Solaris: Run the following command:
su - esecadm
6 Change to the following directory:
Windows:

%ESEC_HOME%\bin
Linux/Solaris:

$ESEC_HOME/bin
7 Run the LDAP authentication configuration script:
Windows:

ldap_auth_config.bat
Linux/Solaris:

./ldap_auth_config.sh
The script takes a back up of the
the directory as
config
them for LDAP authentication.
8 Specify the following information:
Press Enter to accept the default value suggested in the brackets [ ] or specify a new value to
override the default value.
Parameter
Sentinel install location
LDAP server hostname or IP address
LDAP server port
<Install_Directory>/config/<cert-file>
esec
and
auth.login
and
auth.login.sav
Description/Action
The installation directory on the Sentinel 6.1 server. The
default location is:

Windows:

Linux/Solaris:
The hostname or the IP address of the machine where
the LDAP server is installed. The default value is
localhost. However, it is not recommended to install the
LDAP server on the same machine as the Sentinel 6.1
server.
The port number for a secure LDAP connection. The
default port number is 636.
configuration.xml
configuration.xml.sav
%ESEC_HOME%
$ESEC_HOME
configuration files in
before modifying
Installing Sentinel 6.1 SP2 63