Using The Central Management Console To Publish Report Templates - Novell SENTINEL 6.1 SP2 - INSTALLATION GUIDE 02-2010 Installation Manual

11 Click Next.
After you click Next, only the first report displays in the category.
12 In the Specify Schedule window, ensure that Let users update the object is selected, then click
Next.
13 In the Specify Repository Refresh window, click Enable All to enable repository refresh, then
click Next.
14 In the Specify Keep Saved Data window, click Enable All to keep saved data when publishing
reports, then click Next.
15 In the Change Defaults Values window, ensure that Publish reports without modifying
properties is selected, then click Next.
16 Click Next to add your objects.
A published list displays.
17 Click Finish.
When the Sentinel templates for Crystal Reports are published to Crystal Reports Server, the
templates must reside within the
Sentinel Control Center.
7.8.3 Using the Central Management Console to Publish
Report Templates
Sentinel reports are now distributed through Solution Packs, but the method in this section can be
used to publish report templates that are from a source other than a Solution Pack.
1 Open a Web browser and provide the following URL:
http://<hostname_or_IP_of_web_server>:<port number_for_webserver_port>/
businessobjects/enterprise115/WebTools/adminlaunch
2 Click Central Management Console.
3 Log in to your Crystal Reports Server.
4 In the Organize pane, click Folders.
5 On the upper right corner, click New Folder.
6 Create a
Ensure that the folder name is
7 Click SentinelReports.
8 Click Subfolders and create subfolders if required. If you are manually adding the Sentinel core
reports, create the following subfolders:
Advisor_Vulnerability

Dashboards

 Incident Management
118 Sentinel 6.1 Installation Guide
SentinelReports
folder (if it does not exist already), then click OK.
SentinelReports
SentinelReports
directory, or they are not displayed in the
.