17 Double-click the incident to display.
18 Click File > Exit or click the X button on the upper right corner of the window to close the
Incident window.
19 Click the Analysis tab.
The Analysis Navigator window with the
20 Click Historical Event Queries.
21 Click Analysis > Create Report or click the Create Report icon.
An Event Query window is displayed. Set the following:
time frame
filter
severity level
batch size (this is the number of events to view – events display from oldest events to
newer events)
22 Click the Begin Searching icon.
74
Sentinel 6.1 Installation Guide
folder is displayed.
Events