Supported Hardware And Software Platforms - Cisco CSACS-1121-K9 Reference Manual

Accessing the ACS CLI
To log in to ACS server and access the CLI, use an SSH secure shell client or the console port. You can
log in from:
•
•
•
•
To exit the CLI, use the exit command from the EXEC mode. If currently in one of the configuration
modes and you want to exit the CLI, enter the end, exit, Ctrl-d or Ctrl-z command to return to the EXEC
mode, and then enter the exit command (see

Supported Hardware and Software Platforms

The following valid terminal types can access ACS:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
See the terminfo database for a complete listing.
You can also access ACS through an SSH client or the console port.
CLI Reference Guide for the Cisco Secure Access Control System 5.1
2-4
A PC running Windows XP/Vista.
A PC running Linux.
An Apple computer running Mac OS X 10.4 or later.
Any terminal device compatible with VT100 or ANSI characteristics. On the VT100-type and ANSI
devices, you can use cursor-control and cursor-movement key. Keys include left arrow, up arrow,
down arrow, right arrow, Delete, and Backspace. The CLI senses the use of the cursor-control keys
and automatically uses the optimal device characteristics (see
Platforms, page 2-4, for more information).
1178
2621
5051
6053
8510
altos5
amiga
ansi
apollo
Apple_Terminal
att5425
ibm327x
kaypro
vt100
Chapter 2 Using the ACS Command Line Interface
Supported Hardware and Software
EXEC Mode, page 2-6).
OL-18996-01