Supported PSBU Hardware Configurations
Supported PSBU Hardware Configurations
•
•
DIMM Memory Configuration
•
•
Cisco Connected Safety and Security UCS C220 Memory
The Cisco Connected Safety and Security UCS C220 (1RU) server is pre-configured with 8GB of system
memory. A single 8GB DIMM is installed in slot A1.
DIMMs are not field replacable or upgradable in the Cisco Connected Safety and Security UCS series
Note
servers.
Figure 1-11
Note
•
•
Cisco Connected Safety and Security UCS C240 Memory
The Cisco Connected Safety and Security UCS C240 (2RU) server is pre-configured with 16GB of
system memory. 8GB DIMM is installed in the slots associated with each CPU (CPU1 and CPU2).
Cisco CSS UCS Platform Series User Guide, CPS-UCS-1RU-K9 / CPS-UCS-2RU-K9
1-20
DIMM Memory Configuration, page 1-20
Supported NIC (GigE) Ports (Cisco Video Surveillance), page 1-21
Cisco Connected Safety and Security UCS C220 Memory, page 1-20
Cisco Connected Safety and Security UCS C240 Memory, page 1-20
DIMM Slot Numbering: Cisco Connected Safety and Security UCS C220
Only CPU 1 (and the associated channels A, B, C, and D) are supported in this release.
CPU2 is not supported. Any DIMM modules installed in the CPU2-supported channels E, F, G, and
H will be ignored and unused by the server.
(Figure
1-11).
Chapter 1
Overview