Power Cord Specifications; Supported Power Cords And Plugs - Cisco CDE 220 Series Hardware Installation Manual

Power Cord Specifications

This appendix provides supported power cable specifications.
This appendix contains the following sections:
•

Supported Power Cords and Plugs

Each power supply has a separate power cord. Standard power cords or jumper power cords are available
for connection to the server. The jumper power cords, for use in racks, are available as an optional
alternative to the standard power cords.
Only the approved power cords or jumper power cords provided with the server are supported.
Note
Table C-1
Table C-1
Description
SFS-250V-10A-AR
Power Cord, 250 VAC 10 A IRAM 2073 Plug
Argentina
CAB-9K10A-AU
250 VAC 10 A 3112 Plug,
Australia
SFS-250V-10A-CN
Power Cord, 250 VAC 10 A GB 2009 Plug
China
CAB-9K10A-EU
Power Cord, 250 VAC 10 A M 2511 Plug
Europe
SFS-250V-10A-ID
Power Cord, 250 VAC 16A EL-208 Plug
South Africa, United Arab Emirates, India
Supported Power Cords and Plugs, page C-1
lists the power cords for the server power supplies.
Supported Power Cords for the Server
Cisco Content Delivery Engine 205/220/250/280/285/420/460/475 Hardware Installation Guide
A P P E N D I X
Length
Feet Meters
8.2 2.5
8.2 2.5
8.2 2.5
8.2 2.5
8.2 2.5
C
Power Cord
Reference
Illustration
Figure C-1
Figure C-2
Figure C-3
Figure C-4
Figure C-5
C-1