Show Commands
show terminal
To obtain information about the terminal configuration parameter settings, use the show terminal
command in the EXEC mode.
Syntax Description
No arguments or keywords.
Defaults
No default behavior or values.
Command Modes
EXEC
Usage Guidelines
None.
Examples
acs/admin# show terminal
TTY: /dev/pts/0 Type: "vt100"
Length: 25 lines, Width: 80 columns
Session Timeout: 30 minutes
acs/admin#
Table A-14
Table A-14
Field
TTY: /dev/pts/0
Type: "vt100"
Length: 24 lines
Width: 80 columns
Session Timeout: 30 minutes Length of time, in minutes, for a session, after which the connection
show timezone
To display the time zone as set on the system, use the show timezone command in the EXEC mode.
Syntax Description
No arguments or keywords.
CLI Reference Guide for the Cisco Secure Access Control System 5.1
A-88
show terminal
describes the fields of the show terminal output.
Show Terminal Field Descriptions
show timezone
Description
Displays standard output to type of terminal.
Type of current terminal used.
Length of the terminal display.
Width of the terminal display, in character columns.
closes.
Appendix A
ACS Command Reference
OL-18996-01