Decrypt-Support-Bundle; Export-Data - Cisco CSACS-1121-K9 Reference Manual

ACS Configuration Commands

decrypt-support-bundle

To decrypt an ACS support bundle that was generated using the acs support command, use the
decrypt-support-bundle command in the ACS Configuration mode. Only the super admin can issue this
command.
Syntax Description
repository
filename
Defaults None.
Command Modes
ACS Configuration
Usage Guidelines In ACS 5.1, whenever you generate an ACS support bundle using the acs support command, ACS
encrypts the support bundle. You need to issue the decrypt-support-bundle command to decrypt the
support bundle.
Examples
acs/admin(config-acs)# decrypt-support-bundle myrepostiory bundle.tar.gz
Decrypting Support Bundle...
Repository: myRepository
Support Bundle: bundle.tar.gz
Decryption completed successfully - decrypted bundle: dec_28716.tar.gz is located on your
repository.
Related Commands Command
acs support

export-data

To export the configuration data from an ACS local store to a remote repository, use the command
export-data in the ACS Configuration mode. Only users who have Read permission to a specific
configuration object in the GUI can export that specific configuration data to a remote repository.
CLI Reference Guide for the Cisco Secure Access Control System 5.1
A-98
decrypt-support-bundle repository filename
The repository where you have placed the support bundle to decrypt.
The support bundle that you want to decrypt.
export-data {user | host | device | idgroup | ndg | dacl | cmdset} repository file-name
result-file-name {full secret-phrase | none | only-sec-repo | only-sec-files secret-phrase}
Description
Gathers information for ACS troubleshooting.
Appendix A ACS Command Reference
OL-18996-01