Appendix A
ACS Command Reference
Starting ACS ....
To verify that ACS processes are running, use the
'show application status acs' command.
acs/admin(config-GigabitEthernet)#
Related Commands
Command
shutdown
configuration mode)
ip default-gateway
show interface
interface
ip default-gateway
To define or set a default gateway with an IP address, use the ip default-gateway command in
Configuration mode. To disable this function, use the no form of this command.
Syntax Description
ip-address
Defaults
Disabled.
Command Modes
Configuration
Usage Guidelines
If you enter more than one argument or no arguments at all, an error occurs.
Examples
acs/admin(config)# ip default-gateway 209.165.202.129
acs/admin(config)#
Related Commands
Command
ip address
configuration mode)
ip domain-name
To define a default domain name that the ACS server uses to complete hostnames, use the ip
domain-name command in Configuration mode. To disable this function, use the no form of this
command.
OL-18996-01
(interface
ip default-gateway ip-address
IP address of the default gateway.
Description
(interface
Sets the IP address and netmask for the Ethernet interface.
Description
Disables an interface (see
Sets the IP address of the default gateway of an interface.
Displays information about the system IP interfaces.
Configures an interface type and enters the interface mode.
CLI Reference Guide for the Cisco Secure Access Control System 5.1
Configuration Commands
shutdown, page
A-137).
A-125