Acs Patch; Acs Reset-Config - Cisco CSACS-1121-K9 Reference Manual

EXEC Commands
Command Modes EXEC
Usage Guidelines ACS patches contain small fixes that include isolated files, not a full version of the ACS software. ACS
patch installations and removals require that you restart ACS.
Examples
Example 1
acs/admin# acs patch install acspatch.tar.gpg repository myrepository
Installing an ACS patch requires a restart of ACS services.
Would you like to continue? Y/N
Example 2
acs/admin# acs patch remove acspatch.tar.gpg repository myrepository
Removing an ACS patch requires a restart of ACS services.
Would you like to continue? Y/N
Related Commands Command
show application
show version

acs reset-config

To reset the ACS configuration to factory defaults, use the acs reset-config command in the EXEC
mode.
Syntax Description
No arguments or keywords.
Defaults
No default behavior or values.
Command Modes EXEC
Usage Guidelines If you use the acs reset-config command to reset your ACS to the factory default configuration, any
configurations you have performed are lost; however, the appliance settings (such as network settings
and backup repositories) are not affected.
ACS does not need to be running when you use this command.
Examples
acs/admin# acs reset-config
This command will reset the ACS configuration.
CLI Reference Guide for the Cisco Secure Access Control System 5.1
A-16
Description
Shows application status and version information.
Displays information about the software version of the system.
acs reset-config
Appendix A ACS Command Reference
OL-18996-01