Cisco CSACS-1121-K9 Reference Manual page 135

Appendix A ACS Command Reference
The debug logging configuration remains in effect even after a reboot. To reconfigure, use the debug-log
command again or the no debug-log command.
When you set the log level of debug logs to DEBUG for the following components, the active directory
client logs are automatically enabled. Similarly, when you disable the DEBUG log level on one of these
components, the active directory logs are disabled:
•
•
•
•
Examples
acs/admin(config-acs)# debug-log mgmt level warn
acs/admin(config-acs)#
Related Commands Command
acs (instance)
acs (process)
acs backup
acs-config
acs patch
acs reset-config
acs reset-password
acs restore
acs support
backup
backup-logs
export-data
replication force-sync
restore
show debug-adclient
show acs-logs
show application
show version
OL-18996-01
mgmt-validation
–
mgmt-changepassword
–
mgmt-license
–
mgmt-acsview
–
all
mgmt
runtime
runtime-idstores
Description
Starts or stops an ACS instance.
Starts or stops an ACS process.
Performs a backup of an ACS configuration.
Enters the ACS Configuration mode.
Installs and removes ACS patches.
Resets the ACS configuration to factory defaults.
Resets the 'acsadmin' administrator password to the default setting.
Performs a restoration of an ACS configuration.
Gathers information for ACS troubleshooting.
Performs a backup (ACS and ADE OS) and places the backup in a
repository.
Backs up system logs.
Restores to the default local debug logging level of the ACS
components.
Synchronizes the secondary ACS database to the primary ACS
database.
Restores from backup the file contents of a specific repository.
Shows the debug log level status for subsystems (enabled or disabled).
Displays ACS server debug logs.
Shows application status and version information.
Displays information about the software version of the system.
CLI Reference Guide for the Cisco Secure Access Control System 5.1
ACS Configuration Commands
A-97