Acs Configuration Commands; Access-Setting Accept-All - Cisco CSACS-1121-K9 Reference Manual

Appendix A ACS Command Reference
Examples
acs/admin# show version
Cisco Application Deployment Engine OS Release: 1.1
Build Version: 1.1.0.416
Copyright (c) 2005-2008 by Cisco Systems, Inc.
All rights reserved.
Hostname: acs
Version information of installed applications
---------------------------------------------
Cisco ACS VERSION INFORMATION
-----------------------------
Version :
Release :
acs/admin#

ACS Configuration Commands

Each ACS Configuration command includes a brief description of its use, command syntax, usage
guidelines, and sample output.
To access the ACS Configuration mode, you must use the acs-config command in the EXEC mode.
This section describes the following Configuration commands.
•
•
•
•
•
•
•
•
•
•
•
•
•
•

access-setting accept-all

To reset the IP address filtering to allow any IP address to access the management pages of an ACS
server, use the access-setting accept-all command in the ACS Configuration mode. Only the super
admin has the privilege to use this command on a primary ACS node.
OL-18996-01
5.1
100
access-setting accept-all
debug-adclient
debug-log
decrypt-support-bundle
export-data
import-data
import-export-abort
import-export-status
no debug-adclient
no debug-log
replication force-sync
reset-management-interface-certificate
show debug-adclient
show debug-adclient
access-setting accept-all
CLI Reference Guide for the Cisco Secure Access Control System 5.1
ACS Configuration Commands
A-93