Appendix A
ACS Command Reference
Syntax Description
>
file
|
Table A-11
|
Defaults
No default behavior or values.
Command Modes
EXEC
Usage Guidelines
None.
Examples
Example 1
acs/admin# show icmp_status
icmp echo response is turned on
acs/admin#
OL-18996-01
Output direction.
Name of file to redirect standard output (stdout).
Output modifier commands:
•
begin—Matched pattern. Up to 80 alphanumeric characters.
count—Count the number of lines in the output. Add number after the
•
word count.
–
|—Output modifier commands (see
•
end—End with line that matches. Up to 80 alphanumeric characters.
exclude—Exclude lines that match. Up to 80 alphanumeric characters.
•
include—Include lines that match. Up to 80 alphanumeric characters.
•
last—Display last few lines of output. Add number after the word last.
•
Up to 80 lines to display. Default 10.
|—Output modifier commands (see
–
Output Modifier Variables for Count or Last
Output modifier variables:
begin—Matched pattern. Up to 80 alphanumeric characters.
•
count—Count the number of lines in the output. Add number after the
•
word count.
|—Output modifier variables.
end—End with line that matches. Up to 80 alphanumeric characters.
•
exclude—Exclude lines that match. Up to 80 alphanumeric characters.
•
include—Include lines that match. Up to 80 alphanumeric characters.
•
last—Display last few lines of output. Add number after the word last.
•
Up to 80 lines to display. Default 10.
|—Output modifier variables.
CLI Reference Guide for the Cisco Secure Access Control System 5.1
Show Commands
Table
A-11).
Table
A-11).
A-73